Product Description
【 Premium Recommendation 】 Second-hand Doosan DX75 excavator from 2019, with outstanding performance and quality guaranteed. Priced at only 95,000 yuan, it's in stock and ready for immediate use! Since its release in 2019, this Doosan DX75 excavator has accumulated a working time of only 1,600 hours, which is far below the average service life of similar equipment. This means that it is still in the best working condition and can almost be regarded as a nearly new car. The entire machine is well maintained, with a clean appearance and no obvious bumps or scratches. All components are operating smoothly and there are no records of any faults. In terms of power, it is equipped with the Yanmar 4TNV98-Z engine, which has been well-tested in the market. This engine is renowned for its powerful output and excellent fuel economy, and can easily handle the operational demands under various complex working conditions. Meanwhile, the advanced electronic control system makes the start-up smoother and the noise lower, meeting the latest environmental protection standards. The hydraulic system is one of the key indicators for evaluating the performance of an excavator. This DX75 is equipped with an efficient and energy-saving load-sensing hydrau
| Specifications | Value |
|---|---|
| No. | 963385 |
| Tonnage (tons) | 7 |
| Working weight (kg) | 7350 |
| Bucket capacity (m³) | 0.28 |
| Country of origin | Yantai, China |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Yanmar 4TNV94L |
| Rated power (kw/rpm) | 39.7 / 2200 |
| Maximum torque (N.m) | 24.6/1475 |
| Number of cylinders (PCS) | 4 |
| Working form | 4-stroke, water-cooled, direct spray |
| Rotation speed (rpm) | 10.7 |
| Climbing ability (%) | 30 ° |
| Bucket digging force (kN) | 53.4 |
| Rod digging force (kN) | 36.9 |
| Travel speed (km/h) | 3.0 / 4.7 |
| Turning torque (Nm) | 23.4 ~ 24.6 |
| Main pump type | Variable piston pump |
| Fuel Tank (L) | 111 |
| Total transport length (mm) | 6030 |
| Total transport width (mm) | 2100 |
| Total transport height (mm) | 2680(to top of cab) |
| Full cab height (mm) | 2680 |
| Minimum ground clearance (mm) | 370 |
| Minimum turning radius of front working device (mm) | 1745 |
| Back end turning radius (mm) | 1755 |
| Onboard width (mm) | 2130 |
| Total track length (mm) | 2750 |
| Track gauge (mm) | 1650 |
| Track ground length (mm) | 2110 |
| Maximum digging radius (mm) | 6270 |
| Maximum digging depth (mm) | 3930 |
| Maximum excavation height (mm) | 7050 |
| Maximum unloading height (mm) | 5165 |
| Maximum vertical digging depth (mm) | 2570 |
| Dodging plate width × height (mm) | 2100 x 420 |
| Maximum excavation radius of stop surface (mm) | 6115 |
WhatsApp
Facebook
