Product Description
【 Premium Recommendation 】 Komatsu PC120-6 second-hand excavator. This machine is a very popular eco-friendly model in the market. It not only has a beautiful appearance and is in good condition, but also has stable performance, making it very suitable for working directly on construction sites. This excavator has a working time of only over 6,000 hours, which is far lower than the average usage time of similar equipment. This means that it still has a long service life waiting for its new owner to dig. In terms of the power system, the Komatsu PC120-6 is equipped with an efficient and energy-saving engine, which can provide strong and smooth power output. It can handle both flat ground excavation and slope operations with ease. More importantly, this engine adopts advanced emission control technology and complies with the latest environmental protection standards, making your construction more green and low-carbon. The hydraulic system is a major highlight of this model. It adopts Komatsu's unique intelligent hydraulic control system, which can automatically adjust the flow and pressure according to the actual operation requirements, thereby achieving the best balance between work efficiency and fuel economy. In addition, this syste
| Specifications | Value |
|---|---|
| No. | 964035 |
| Tonnage (tons) | 12 |
| Working weight (kg) | 12030 |
| Bucket capacity (m³) | 0.5 |
| Rod length (mm) | 2100 |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu Komatsu SAA4D95LE-3 |
| Rated power (kw/rpm) | 64/2200 |
| Cooling mode | water-cooling |
| Displacement (L) | 3.26 |
| Working form | Direct injection, turbocharged, intercooled diesel engine |
| Ground specific pressure (Kpa) | 0.39kg/c㎡ |
| Rotation speed (rpm) | 11 |
| Climbing ability (%) | 70/30 ° |
| Bucket digging force (kN) | 8800 |
| Rod digging force (kN) | 6300 |
| Travel speed (km/h) | 2.7-5.5 |
| Maximum flow of main pump (l/min) | 226L/min |
| Traveling Hydraulic Circuit (Mpa) | 355kg/c㎡ |
| Rotary Hydraulic Circuit (Mpa) | 295kg/c㎡ |
| Control Hydraulic Circuit (Mpa) | 30kg/c㎡ |
| Hydraulic crushing pipeline is standard | no |
| Working Hydraulic Circuit (Mpa) | 325kg/c㎡ |
| Fuel Tank (L) | 247 |
| Hydraulic Tank (L) | 90 |
| Engine Oil changes (L) | 11 |
| Coolant (L) | 13.4 |
| Total transport length (mm) | 7599 |
| Total transport height (mm) | 2175 |
| Full cab height (mm) | 2175 |
| Counterweight ground clearance (mm) | 855 |
| Minimum ground clearance (mm) | 400 |
| Back end turning radius (mm) | 2110 |
| Total track length (mm) | 3610 |
| Track gauge (mm) | 1990 |
| Track plate width (mm) | 500 |
| Track ground length (mm) | 2880 |
| Maximum digging radius (mm) | 8290 |
| Maximum digging depth (mm) | 5520 |
| Maximum excavation height (mm) | 8610 |
| Maximum unloading height (mm) | 6170 |
| Maximum vertical digging depth (mm) | 4940 |
| Bulldozer lift or depth (mm) | No bulldozer |
| Maximum excavation radius of stop surface (mm) | 8170 |
| Maximum effective digging depth (mm) | 5315 |
WhatsApp
Facebook
