










Product Description
We present to you a high-quality second-hand Kato HD308US excavator. This equipment is imported in its original form and is from a Shenzhen stall. Its estimated working time is only 4,000 hours, ensuring its excellent mechanical condition and long service life. This excavator is equipped with an ISUZU engine, which is renowned for its fuel efficiency, durability and powerful performance. It not only meets the operational requirements under various complex working conditions, but also effectively reduces operating costs. More importantly, this machine emits clean emissions without generating a single bit of waste gas, which is in line with the modern concept of green and environmentally friendly construction. In terms of the hydraulic system, the Kato HD308US adopts an advanced combination design of hydraulic pumps and hydraulic motors, ensuring smooth and rapid operation with high response sensitivity. Both the digging force and the rotation speed have reached the leading level in the industry. In addition, all chassis components are in good condition, with no obvious signs of wear or damage, which further enhances the stability of the entire machine. In conclusion, this genuine Kato HD308US excavator, which is exempt from inspection
| Specifications | Value |
|---|---|
| No. | 978894 |
| Tonnage (tons) | 8 |
| Working weight (kg) | 7600 |
| Bucket capacity (m³) | 0.28 |
| Boom length (mm) | 3830 |
| Rod length (mm) | 1620 |
| Country of origin | Japan |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | ISUZU CC-4JG1 |
| Rated power (kw/rpm) | 40.5/2100 |
| Cooling mode | water-cooling |
| Cylinder diameter × stroke (mm) | 95.4 x 107 |
| Number of cylinders (PCS) | 4 |
| Displacement (L) | 3.059 |
| Ground specific pressure (Kpa) | 31.4 |
| Rotation speed (rpm) | 12.5 |
| Climbing ability (%) | 70 |
| Bucket digging force (kN) | 61.4 |
| Rod digging force (kN) | 42.2 |
| Travel speed (km/h) | 2.0/3.4/5.0 |
| Rotary hydraulic motor type | Constant piston motor |
| Type of walking hydraulic motor | Variable capacity piston motor |
| Maximum flow of main pump (l/min) | 77.7 x 2 |
| Traveling Hydraulic Circuit (Mpa) | 31.4 |
| Main pump type | Variable capacity piston pump ×2+ gear pump |
| Working Hydraulic Circuit (Mpa) | 29.4 |
| Bucket cylinders - Number × diameter × stroke (mm) | 1-85 x 745 |
| Bucket rod cylinders - Number × diameter × stroke (mm) | 1-95 x 920 |
| Boom cylinders - Number × diameter × stroke (mm) | 1-105 x 960 |
| Fuel Tank (L) | 100 |
| Hydraulic Tank (L) | 48 |
| Engine Oil changes (L) | 9.6 |
| Coolant (L) | 11 |
| Hydraulic System (L) | 95 |
| Total transport length (mm) | 6300 |
| Total transport width (mm) | 2300 |
| Total transport height (mm) | 2600 |
| Full cab height (mm) | 2600 |
| Counterweight ground clearance (mm) | 740 |
| Minimum turning radius of front working device (mm) | 1630 |
| Back end turning radius (mm) | 1190 |
| Total track length (mm) | 2850 |
| Track gauge (mm) | 1850 |
| Track plate width (mm) | 450 |
| Total track width (mm) | 2300 |
| Track ground length (mm) | 2260 |
| Maximum digging radius (mm) | 6470 |
| Maximum digging depth (mm) | 4120 |
| Maximum excavation height (mm) | 7430 |
| Maximum unloading height (mm) | 5320 |
| Maximum vertical digging depth (mm) | 3620 |
| Bulldozer lift or depth (mm) | 430/330 |
| Dodging plate width × height (mm) | 2300 x 360 |
WhatsApp
Facebook




