










| Specifications | Value |
|---|---|
| No. | 963392 |
| Tonnage (tons) | 7 |
| Working weight (kg) | 7000(approx) |
| Country of origin | Chengdu |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | ISUZU AU4LE2X |
| Rated power (kw/rpm) | 41/2200 |
| Cooling mode | water-cooling |
| Cylinder diameter × stroke (mm) | 85 x 96 |
| Number of cylinders (PCS) | 4 |
| Displacement (L) | 2.179 |
| Rotary hydraulic motor type | Axial piston motor |
| Traveling Hydraulic Circuit (Mpa) | 27.5 |
| Rotary Hydraulic Circuit (Mpa) | 14.5 |
| Control Hydraulic Circuit (Mpa) | 3.5 |
| Main pump type | Double variable displacement axial piston pump + pilot gear pump |
| Working Hydraulic Circuit (Mpa) | 29.4 |
| Fuel Tank (L) | 120 |
| Hydraulic Tank (L) | 72 |
| Engine Oil changes (L) | 11 |
| Coolant (L) | 8.5 |
| Hydraulic System (L) | 120 |
| Total transport height (mm) | 2630 |
| Full cab height (mm) | 2630 |
| Minimum turning radius of front working device (mm) | 1760 |
| Back end turning radius (mm) | 1290 |
| Maximum digging radius (mm) | 6460 |
| Maximum digging depth (mm) | 4160 |
| Maximum excavation height (mm) | 7390 |
| Maximum unloading height (mm) | 5330 |
| Maximum vertical digging depth (mm) | 3450 |
| Maximum excavation radius of stop surface (mm) | 6300 |
| Maximum effective digging depth (mm) | 3800 |
| Travel speed (km/h) | 2.8/5.3 |
Description
【 Premium Recommendation 】 This second-hand Kobelco SK75 excavator from 2013 is in excellent condition and definitely worth your ownership! This excavator has maintained its original paint since leaving the factory, with a neat and new appearance. The three major components (engine, hydraulic pump, and main valve) have never been disassembled or repaired, ensuring the stability and durability of the machine. It is equipped with the highly efficient and energy-saving Yanmar 4TNV98 engine, which is powerful and has good fuel economy. It can handle both idling and full-load operation with ease. The hydraulic system adopts advanced negative flow control technology, featuring flexible and precise operation, rapid response, and the ability to meet the operational requirements under various complex working conditions. In addition, the cumulative working time of this equipment is only about 3,000 hours, which is far lower than the average service life of similar second-hand excavators, indicating that there is still a long service life awaiting excavation. The vehicle is accompanied by complete official invoices and certificates of conformity, which prove its legality, compliance and reliable source. The current customer quotation is 75,000 RM
WhatsApp
Facebook