| Specifications | Value |
|---|---|
| No. | 965312 |
| Tonnage (tons) | 20 |
| Working weight (kg) | 19180 |
| Bucket capacity (m³) | 0.8 |
| Boom length (mm) | 5700 |
| Rod length (mm) | 1840 |
| Country of origin | Japan |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu Komatsu S6D102E |
| Rated power (kw/rpm) | 99/2200 |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 5.9 |
| Ground specific pressure (Kpa) | 44.1 |
| Rotation speed (rpm) | 12.4 |
| Climbing ability (%) | 70/35 ° |
| Travel speed (km/h) | 5.5 |
| Main overflow set pressure (Mpa) | 34.818 |
| Maximum flow of main pump (l/min) | 412 |
| Fuel Tank (L) | 340 |
| Hydraulic System (L) | 166 |
| Total transport length (mm) | 9510 |
| Total transport width (mm) | 2800 |
| Total transport height (mm) | 2985 |
| Full cab height (mm) | 2905 |
| Counterweight ground clearance (mm) | 440 |
| Minimum ground clearance (mm) | 440 |
| Back end turning radius (mm) | 2750 |
| Track gauge (mm) | 2200 |
| Track plate width (mm) | 600 |
| Total track width (mm) | 2800 |
| Track ground length (mm) | 3270 |
| Maximum excavation height (mm) | 8895 |
| Maximum unloading height (mm) | 6065 |
| Maximum vertical digging depth (mm) | 4965 |
Description
【 Premium Recommendation 】 Second-hand Komatsu PC200-6 excavator, quality exempted from inspection, priced at just over 50,000! This Komatsu PC200-6 excavator has maintained an excellent working condition since it left the factory. It has a cumulative working time of approximately 5,000 hours. For a medium-sized excavator, such working hours not only prove its durability but also indicate that it is in the golden age of mechanical performance, neither too old nor severely worn. This aircraft is equipped with the original imported SAA6D102E-1 engine from Komatsu. This power system is renowned for its powerful output and excellent fuel economy, ensuring stable and reliable performance under various complex working conditions. In addition, the advanced electronic control system can automatically adjust the rotational speed according to the actual operation requirements, thereby achieving a perfect balance between the best working efficiency and the lowest fuel consumption. In terms of the hydraulic system, Komatsu PC200-6 adopts the highly efficient and energy-saving CLSS closed center load sensing system, combined with a large-capacity oil tank design. Even during long-term continuous operation, it can ensure an adequate supply of hyd
WhatsApp
Facebook
