Product Description
【 Premium Recommendation 】 Imported Komatsu PC200-8N1 excavator, original condition without inspection, outstanding performance, quality guaranteed! This second-hand Komatsu PC200-8N1 excavator is a very popular medium-sized excavator in the market. Its working time is only 3,500 hours, which is far lower than the average service life of similar equipment. This means that its mechanical wear is relatively low, and it has a longer service life and higher cost performance. In terms of the power system, this excavator is equipped with a Komatsu SAA6D102E-1 turbocharged engine, which is renowned for its powerful output and smooth, reliable operation. It can maintain efficient operation even under harsh working conditions and has good fuel economy, significantly reducing operating costs. The hydraulic system adopts the advanced CLSS closed center load sensing system, which can intelligently adjust the oil distribution according to the actual operation requirements. This not only improves work efficiency but also effectively reduces energy consumption. In addition, its outstanding response speed and control accuracy make the operation more effortless and convenient. It is particularly worth mentioning that "original vehicle condition exe
| Specifications | Value |
|---|---|
| No. | 972130 |
| Tonnage (tons) | 20 |
| Working weight (kg) | 19500 |
| Bucket capacity (m³) | 0.8 |
| Rod length (mm) | 2900 |
| Country of origin | Japan |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu SAA6D107E-1-A |
| Rated power (kw/rpm) | 110/2000 |
| Cooling mode | water-cooling |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 6.69 |
| Working form | Direct injection |
| Ground specific pressure (Kpa) | 44.1 |
| Rotation speed (rpm) | 12.4 |
| Bucket digging force (kN) | 149 |
| Rod digging force (kN) | 108 |
| Travel speed (km/h) | 5.5/4.1/3.0 |
| Rotary hydraulic motor type | Fixed displacement axial piston motor |
| Type of walking hydraulic motor | Variable axial piston motor |
| Traveling Hydraulic Circuit (Mpa) | 37.3 |
| Working Hydraulic Circuit (Mpa) | 34.8 |
| Fuel Tank (L) | 400 |
| Hydraulic Tank (L) | 135 |
| Hydraulic System (L) | 232 |
| Total transport length (mm) | 9425 |
| Total transport width (mm) | 2800 |
| Total transport height (mm) | 3040 |
| Minimum turning radius of front working device (mm) | 3040 |
| Back end turning radius (mm) | 2750 |
| Total track length (mm) | 4070 |
| Track gauge (mm) | 2200 |
| Track plate width (mm) | 600 |
| Maximum digging radius (mm) | 9875 |
| Maximum digging depth (mm) | 6620 |
| Maximum excavation height (mm) | 10000 |
| Maximum unloading height (mm) | 1110 |
| Maximum excavation radius of stop surface (mm) | 9700 |
WhatsApp
Facebook
