










Product Description
【 Premium Recommendation 】 Imported original Komatsu 200-8N1 excavator, in top-notch condition, ready to go straight to the construction site! This Komatsu 200-8N1 excavator is a high-quality second-hand construction machinery from Japan. After meticulous maintenance and care by a professional team, the overall condition of the vehicle is excellent, with a clean appearance and no obvious damage, and the internal structure is intact. The working time is only 3,500 hours, which is far lower than the average service life of similar equipment. This means that it still has a long service life to be excavated. In terms of the power system, this machine is equipped with the original Komatsu S6D102E-1 engine, which is powerful, stable and reliable, and can easily handle the heavy-load operation requirements under various complex working conditions. It has good fuel economy and low operating costs, saving users a lot of expenses. The hydraulic system adopts an advanced closed central circuit design, featuring a fast response speed, flexible and precise operation. It performs exceptionally well in both excavation force and walking speed. In addition, it is equipped with a variety of safety protection devices to ensure that it can maintain a g
| Specifications | Value |
|---|---|
| No. | 972301 |
| Tonnage (tons) | 20 |
| Working weight (kg) | 19500 |
| Bucket capacity (m³) | 0.8 |
| Rod length (mm) | 2900 |
| Country of origin | Japan |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu SAA6D107E-1-A |
| Rated power (kw/rpm) | 110/2000 |
| Cooling mode | water-cooling |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 6.69 |
| Working form | Direct injection |
| Ground specific pressure (Kpa) | 44.1 |
| Rotation speed (rpm) | 12.4 |
| Bucket digging force (kN) | 149 |
| Rod digging force (kN) | 108 |
| Travel speed (km/h) | 5.5/4.1/3.0 |
| Rotary hydraulic motor type | Fixed displacement axial piston motor |
| Type of walking hydraulic motor | Variable axial piston motor |
| Traveling Hydraulic Circuit (Mpa) | 37.3 |
| Working Hydraulic Circuit (Mpa) | 34.8 |
| Fuel Tank (L) | 400 |
| Hydraulic Tank (L) | 135 |
| Hydraulic System (L) | 232 |
| Total transport length (mm) | 9425 |
| Total transport width (mm) | 2800 |
| Total transport height (mm) | 3040 |
| Minimum turning radius of front working device (mm) | 3040 |
| Back end turning radius (mm) | 2750 |
| Total track length (mm) | 4070 |
| Track gauge (mm) | 2200 |
| Track plate width (mm) | 600 |
| Maximum digging radius (mm) | 9875 |
| Maximum digging depth (mm) | 6620 |
| Maximum excavation height (mm) | 10000 |
| Maximum unloading height (mm) | 1110 |
| Maximum excavation radius of stop surface (mm) | 9700 |
WhatsApp
Facebook




