







Product Description
This second-hand XCMG XE80 excavator produced in 2013, with its outstanding performance and reliable stability, has become a capable assistant in many construction projects. The equipment has a moderate working time, with a cumulative usage time of approximately 5,000 hours. The overall condition is good, and it can be put into operation immediately upon arrival without any additional maintenance or repair, ensuring that your project progress is not affected. In terms of the power system, this excavator is equipped with a highly efficient and energy-saving diesel engine. The expected model is Yanmar 4TNV98, with a maximum output power of up to 40.5 kilowatts at 2,200 revolutions per minute. This not only ensures strong power output but also features excellent fuel economy, effectively reducing operating costs. Meanwhile, advanced waste gas treatment technologies ensure that emissions comply with national environmental protection standards, making them greener and more low-carbon. The hydraulic system adopts a combination of high-performance variable piston pumps and low-noise, high-efficiency hydraulic motors, providing a stable and precise operating experience. The main pump has a large flow rate and a fast response speed, which can
| Specifications | Value |
|---|---|
| No. | 977095 |
| Tonnage (tons) | 8 |
| Working weight (kg) | 7425 |
| Bucket capacity (m³) | 0.14-0.34 |
| Boom length (mm) | 3710 |
| Rod length (mm) | 1650 |
| Country of origin | Xuzhou |
| power | Traditional power |
| manufacturer | Made in China |
| bucket | backhoe |
| Engine type | Cummins B3.3 |
| Rated power (kw/rpm) | 60/2200 |
| Cooling mode | water-cooling |
| Number of cylinders (PCS) | 6 |
| Displacement (L) | 3.3 |
| Working form | Water cooled/turbocharged |
| Ground specific pressure (Kpa) | 34.2 |
| Rotation speed (rpm) | 12 |
| Climbing ability (%) | 35 ° |
| Bucket digging force (kN) | 53.6 |
| Rod digging force (kN) | 39.2 |
| Travel speed (km/h) | 4.2/2.7 |
| Main overflow set pressure (Mpa) | 27.4 |
| Rotary hydraulic motor type | Plunger hydraulic motor |
| Type of walking hydraulic motor | Plunger hydraulic motor |
| Maximum flow of main pump (l/min) | 1*198+21 |
| Traveling Hydraulic Circuit (Mpa) | 27.4 |
| Rotary Hydraulic Circuit (Mpa) | 20.6 |
| Hydraulic crushing pipeline is standard | no |
| Main pump type | Toshiba variable pump ×1+ gear pump ×1 |
| Pilot Oil Circuit (MPa) | 3.9 |
| Fuel Tank (L) | 127 |
| Hydraulic Tank (L) | 124 |
| Engine Oil changes (L) | 7 |
| Total transport length (mm) | 6155 |
| Total transport width (mm) | 2220 |
| Total transport height (mm) | 2610 |
| Counterweight ground clearance (mm) | 786 |
| Minimum ground clearance (mm) | 392 |
| Minimum turning radius of front working device (mm) | 1815 |
| Back end turning radius (mm) | 1770 |
| Track gauge (mm) | 1700 |
| Track plate width (mm) | 450 |
| Track ground length (mm) | 2119 |
| Maximum digging radius (mm) | 6375 |
| Maximum digging depth (mm) | 4140 |
| Maximum excavation height (mm) | 7167 |
| Maximum unloading height (mm) | 5100 |
| Maximum vertical digging depth (mm) | 3218 |
WhatsApp
Facebook




